Slx/xt/xtr disc brake pads - after 2012

Designed for replacing your disc brake pads for good braking in all conditions.

What tools will you need?

In this procedure, you may need: A pad spreader, brake cleaner and a microfibre cloth.

Running in bike brake pads is an essential procedure to ensure good braking performance:

Running in creates regular friction between the pads and discs. Before you start, clean your discs thoroughly and replace them if the pads are new.Put on your helmet, check your GPS equipment or cycle computer and find a clear, flat route.

The running-in procedure consists of braking gradually several times at increasing speeds:

To run the brakes in properly you need to alternate their use and follow a three-phase protocol:Ten braking manoeuvres at 15 km/h, then ten at 20 km/h, and finally ten at 25 km/h, each time decelerating gradually to 5 km/h.Between each stage, cycle freely to allow the system to breathe.

Some additional tips for running in brake pads:

Take care of your brakes from the moment you start pedalling:use one brake at a time, avoid sudden braking, and stay on a flat road.The running-in period can last up to 30 minutes.If you notice a drop in performance or rainbow reflections on the discs, your pads may be glazed. If this happens, we recommend visiting a Decathlon workshop.

Shimano compatible: XTR BR-M9000, BR-M9020, BR-M987, BR-M985 / XT BR-M8000, BR-M785 / SLX BR-M7000, BR-M675, BR-M666 / Deore BR-M6000, BR-M615 / Alfine BR-S700 / BR-R785 /BR-RS785 / BR-R517 / BR-R317

Compatibility

SHIMANO

Robustness

Effective even in water and mud.

Abrasion resistance

Sintered material with a high friction index. 2x longer lasting than an organic

Brake control

Guarantees steady braking.

Designed for replacing your disc brake pads for good braking in all conditions.