20x1.9/2.2 33 mm schrader valve inner tube

This inner tube is suitable for 20" diameter tyres with 1.90 to 2.20 section with a 33mm Schrader valve.

To remove your inner tube, the tools you'll need are:

Remove your inner tube easily with B’TWIN tyre levers.

Checks to carry out before installing an inner tube:

Even a tiny fissure in the rim strip can cause a slow leak.Inspect each element before mounting.

Fitting a tyre:

Proper fitting starts at the valve and ends at the opposite end, without the need for a tyre lever to prevent punctures.

How to choose an inner tube:

To take good care of your bike, it's important to know the exact dimensions of your tyres.This information is given on the tyre sidewall (diameter and cross-section). For example, 20 x 2.10 means that the tyre is 20 inches in diameter and 2.10 inches wide. On the tyre sidewall you will also find the dimensions in mm in ETRTO international units. For example, 50-406 means a tyre that is 50mm wide and has an inner diameter of 406mm (approx. 20 x 2.00).

Tip from the pros

Before each use, take a moment to check your tyre pressure and reduce the risk of puncture.

How to change an inner tube

To make it easier to set up, start by our video.Inflate slightly, insert the valve, install the inner tube securely and make sure it is not pinched in the rim.

Find more information available with this link:

https://conseilsport.decathlon.fr/comment-changer-sa-chambre-a-air

Inflating a tyre:

Adhere to the manufacturer's recommended pressure, marked on the sidewall.While inflating, check that the tyre remains evenly positioned on the rim.

Weight:

148g

20" Schrader inner tube (large valve) for 20-inch tyres.

Compatibility

20", 1.9 to 2.2 cross section tyres. ETRTO 47/57 - 406

Watertight

Optimised composition to ensure your inner tube has a good seal.

This inner tube is suitable for 20" diameter tyres with 1.90 to 2.20 section with a 33mm Schrader valve.